The APD20-D Automatic Dehydrator provides reliable pressurization of elliptical waveguide, coaxial cable and rigid transmission line systems with remote monitoring capabilities.
Automatic Pressurization Dehydrator
- Reliable Pressurization of elliptical waveguide, coaxial cable and rigid transmission line systems
- Alarm Notifications for Low Pressure, High Pressure, Humidity, and Run Time
- Monitoring via Remote Samples
GENERAL SPECIFICATIONS |
|
|
Output Capacity @ 60 Hz |
0.2 SCFM |
Output Dew Point |
Ambient dew point greater than 10°C (50°F): 50 (90) dew point reduction minimum Ambient dew point less than 10°C (50°F): -40 (-40) dew point minimum |
High Pressure Safety Relief Valve |
15 psig |
Output Fitting |
Quick-Connect 3/8” OD Plastic Tube |
Operating Voltage |
Dehydrator 120 VAC, Controller 5 VDC |
Maximum Continuous Operation Time, Active |
4 Hours |
ENVIRONMENTAL |
|
|
Ambient Humidity Range |
5% – 85%, non-condensing |
Noise |
60 dBA |
Max. Operational Altitude @ 5 psig |
6500 ft. |
Max. Operational Altitude @ 10 psig |
5000 ft. |
Capacity derating per 1000 ft altitude above MSL |
0.024 CFM |
OPTIONS |
Low Pressure Operation: Software configurable from 1-2.5 psig in 0.5 psig increments
High Pressure Alarm: Software configurable from 3-11 psig in 1 psig increments
Humidity Alarm: Software configurable from 20-50% RH in 10% RH increments
Run Time Alarm: Software configurable from 10 minutes to 4 hours in 10 minute increments
System Purge: Software configurable from 2-10 days in 2 day increments |
|
MODELS |
|
Designed to provide remote status monitoring of the Radio Frequency Systems Dehydrator Model/Options APD20 - D - 35XH0R00S0. |